Dmais 1700mm 67 Inches Large Formart Cold Coating Laminator
DMAIS 1700mm 67 inches Large Formart Cold Coating LaminatorIndependent R&D of Silicone Roller, Only The Best for You------DMAISTechnical ParametersModel NumberDMS-1700ASpeed Gear ControlingVariableNominal Voltage110V/220VMaximum roll film OD200mmPower200WThe diameter specification of Roll film 3......
Send Inquiry
Product Description
DMAIS 1700mm 67 inches Large Formart Cold Coating Laminator
Independent R&D of Silicone Roller, Only The Best for You------DMAIS
Technical Parameters
Equipment Features
1.Unique method of putting film from the back, easily operate.
2.Unilateral linkage , up and down easily.
3.Three laminating ways: auto/foot control/manual.
4.Stepless speed regulation.
5.With reversing function.
6. Uncovering backing paper and finishing products automatically.
7. Only need one person to operate, save cost.
8.Heating to 60ºC to avoid bubble thoroughly.
9. High efficiency and high yield of laminating, whole film of 50m don't bevel.
10. Film and paper tightness-degree system make the cold lamination have good tension, reduce the risk of laminating fold.
11.Infrared ray control temperature, much precise to control temperature.
Independent R&D of Silicone Roller, Only The Best for You------DMAIS
Technical Parameters
| Model Number | DMS-1700A | Speed Gear Controling | Variable |
| Nominal Voltage | 110V/220V | Maximum roll film OD | 200mm |
| Power | 200W | The diameter specification of Roll film | 3 inches |
| Heating Power | 1500W | The raise height of roller | 30mm |
| Frequency Respons | 50HZ-60HZ | Method of pressure adjustment | Pneumatic |
| Operating Temperature | 0ºC-60ºC | Automatically uncovering film androlling body paper equipment | Motor |
| Scope Of Suitable Film Tthickness | 10-250μm | Foot-propelled switch | Yes |
| Warm-up Time | 0-10/Min | Diameter of roller | 130mm |
| Laminating Width | ≤1650mm | Weight | 260kg |
| Laminating speed | 0-10m/Min | Product Size(mm) | 2000×660×1300 |
| Laminating Thickness | 28mm | Packing Size(mm) | 2100×630×670 |
Equipment Features
1.Unique method of putting film from the back, easily operate.
2.Unilateral linkage , up and down easily.
3.Three laminating ways: auto/foot control/manual.
4.Stepless speed regulation.
5.With reversing function.
6. Uncovering backing paper and finishing products automatically.
7. Only need one person to operate, save cost.
8.Heating to 60ºC to avoid bubble thoroughly.
9. High efficiency and high yield of laminating, whole film of 50m don't bevel.
10. Film and paper tightness-degree system make the cold lamination have good tension, reduce the risk of laminating fold.
11.Infrared ray control temperature, much precise to control temperature.
Related Category
Send Inquiry
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.
